bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Lincoln Town Car


  • Hitch, Ball Mount and Wiring Recommendation For 1997 Lincoln Continental
  • We do not currently have a hitch to fit your 1997 Lincoln Continental, the Curt Trailer Hitch Receiver part # C12130 is a fit for 1981 - 2011 Lincoln Town Cars not Continentals. We could do a roof rack or a trunk mounted bike rack. If either of those would help, please let me know and I can help you find everything you need.
    view full answer...

  • Will a Hitch from a 1999 Lincoln Town Car Work on a 2004 Lincoln Town Car
  • A hitch from a 1999 Lincoln Town Car will also fit a 2004 Lincoln Town Car. Since your 2004 has dual exhaust you will need to relocate the exhaust hanger. I attached installation instructions for the Curt Trailer Hitch Receiver # C12130 for you to check out that shows how this is done.
    view full answer...

  • What Modifications are Needed to Install Curt Hitch on 2000 Lincoln Town Car with Dual Exhaust
  • Yes, the attached picture that shows the modifications needed to the exhaust hangers of your 2000 Lincoln Town Car with dual exhaust to allow the Curt hitch part # 13707 to fit and install. This would not significantly affect the exhaust ground clearance.
    view full answer...

  • How To Get a 40 Foot Long RhinoEXTREME RV Sewer Hose
  • Yes, you can connect two of the RhinoEXTREME RV Sewer Hoses w Swivel Fittings part # CAM39867 together or however many you like really to get the length that you need. The hoses each have a lug and bayonet fitting on each side. Please keep in mind we also offer an extension hose part # CAM39865 that is 5' long but it seems like it would be more cost effective to just get two of the above anyhow.
    view full answer...

  • Will Using a Class 3 Trailer Hitch Affect the Air Ride Suspension on a 2004 Lincoln Town Car
  • The hitch will not interfere with the air ride system in your 2004 Lincoln Town Car. What you do need to be aware of is the vehicle towing capacity. These numbers will be in your vehicle owner manual. The air ride system will handle whatever the vehicle can. If these capacities are less than 3,000 gross towing weight or 350 pounds tongue weight, it would not be safe to tow your boat with the Town Car.
    view full answer...

  • Availability of Wiring Schematic for K-Source Replacement Side Mirror for 1995 Lincoln Town Car
  • The K-Source Replacement Side Mirror # KS61593F is designed to plug directly into the connectors on your 1995 Lincoln Town Car so K-Source doesn't have a wiring schematic available. This mirror carries the power remote capability, heated glass, and memory function so, but these functions will only work if your Town Car already has those functions. If you're trying to figure out what wires are for what functions on your vehicle then you could possibly use a circuit tester like part # PTW2979...
    view full answer...

  • 4-Flat Vehicle Connector Plug in Wiring Harness for a 2004 Lincoln Town Car
  • For your 2004 Lincoln Town Car you will need the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 40505. This is a plug and play adapter that provides you with a 4-flat vehicle connector. The Plug-N-Tow (R) Vehicle Wiring Harness with 4 Pole Trailer Connector item # HM41365 you referenced does not fit a Lincoln Town Car.
    view full answer...

  • How To Install Tekonsha Voyager Brake Controller # 39510 On A 1997 Lincoln Town Car
  • To install the Tekonsha Voyager Brake Controller # 39510 on your 1997 Lincoln Town Car, you will need to have a 4-pole trailer connector on the rear of your vehicle and then you will need to hardwire the brake controller with the Brake Controller 7 & 4 Way Installation Kit # ETBC7. If you need to install a 4-pole connector on your vehicle you will use the Tow Ready Wiring Harness # C59496. This harness will tap into the tail light wiring. I am sending a link to the installation instructions...
    view full answer...

  • Best Hitch for a 2003 Lincoln Town Car
  • The best hitch for your 2003 Lincoln Town Car is going to be the Draw-Tite Max-E-Loader Trailer Hitch Receiver item # 41116-011. This hitch is custom fit and bolts directly to your Lincoln with included hardware. It has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight. The combination of an e-coat base and a powder coat finish provides superior rust protection. You will want to verify with your Lincoln's owners manual to confirm your towing capacity. To control your trailer's...
    view full answer...

  • Will the Curt Class II Hitch # C12130 fit 1988 and 1995 Lincoln Town Car
  • The Curt hitch you referenced, part # C12130 will fit a 1980-2010 Lincoln Town Car. It will indeed fit both of your vehicles. This being said, a hitch is not meant to be repeatedly installed and removed or swapped between vehicles. If it is removed and installed on a second vehicle, the manufacturer recommends using new hardware. A hardware kit can be purchased by ordering part # RHK, and typing "C12130" in the part number field. For installation details, click the provided link. I have...
    view full answer...

  • Using the etrailer e98873 Motorcycle Carrier on a 1997 Lincoln Town Car
  • I would not recommend using the etrailer Motorcycle Carrier # e98873 on your 1997 Lincoln Town Car. From the research I have done, your vehicle probably has a maximum tongue weight capacity of 200 lbs. Once you add the weight of the motorcycle carrier and weight of the item you are carrying you will probably exceed the limit of 200 lbs. I would recommend checking your owners manual for the tongue weight and trailer weight capacity of your vehicle and looking into a small trailer. If...
    view full answer...

  • Depth of Flexco Manual Pull-Out Step Single SMFP-1120
  • The stored depth of this step from the center of the front mounting hole to the back of the slide bracket measures 11 inches. The height of the step will be 7 inches when it is stored. I have attached diagrams showing these measurements. To make sure this step will work for you, you will want to make sure that you have at least 11 inches behind the mounting location of the front bolt hole to install this step. As long as you have the 11 inches behind the front bolt hole, this step should...
    view full answer...

  • Holding a Wheelchair on a Thule Trunk Mounted Bike Rack
  • A Bike Rack like the Thule Passage 2, part # TH910XT, is capable of holding up to 35 pounds in each of its carriers. Though its not a recommended use, these can hold manual, folding wheelchairs. This is an exceedingly dangerous use of the Thule Passage though. You will be much better off in the long term adding a hitch like part # 13707, a Class III Curt hitch to carry a traditional cargo carrier. I recommend the Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 48" Ramp - 2" Hitch #...
    view full answer...